When I was starting with pillar drills, I found all of the terms for the various components as well as dimensions actually confusing. This write-up is created in order to help you if you are trying to select a drill as well as should comprehend exactly what all the terms as well as lingo ways.


Components Base On Pillar Drills


Pierce head-- the assembly that composes the chuck, pin, drill bit, electric motor and sheaves.

Base-- the heavy "foot" of the machine that is bolted to the floor when it comes to a bigger pillar drill or the workbench when it comes to a smaller bench-mounted drill.

Column-- this is the upright column that provides the pillar drill one of its names (confusingly, its various other typical names are "bench drill" and also "drill press").

Spindle-- the upright axle that is in line with the drill bit and also attaches the chuck to the drill head.

Chuck-- the assembly that fits into the pin and also holds the drill bit.

Table-- this is often little greater than a step in smaller bench drill models. It's the support for the job piece to be drilled, and is affixed to the column some distance listed below the head and above the base. Tables can be rectangular or round, and also some can be tilted to enable tilted drilling via a work item. Column drill accessories can be gotten to secure or cradle work pieces in various angles.

Depth scale-- a setup that allows the bench drill to pierce a hole part-way with a job piece.


The Definition of Dimensions in Drill Specs


Throat range-- this is the dimension from the local side of the pillar to the spindle centre.

Swing-- this is a common measure of the capability of pillar drills as well as is specified as twice the throat distance, or to place it an additional means, the optimum dimension of disc in which you can pierce a central opening.

Spindle taper-- this defines the shape of the end of the spindle. There are long, brief, female and male types. The chuck has to work with the pin taper.

Collar Size-- this is the outer diameter of the collar or chuck assembly that holds the little bit.

Chuck size-- this is the size of the inner opening of the chuck assembly, so it specifies the maximum size of little bit stem that the drill could take. As a result of this it is additionally known just as the drilling capacity.

Pin travel-- this is the amount by which the spindle can be reduced or raised vertically and defines the maximum deepness of opening you can pierce in one pass.

Maximum range spindle-to-table-- this distance specifies the inmost work item that you can get onto the table.

Optimum range spindle-to-base-- this resembles the above and also defines the maximum deepness of work piece you can pierce with the table removed.

For More Information About Casing Drilling, Mud Saver Valve, Drilling With Casing, Casing Running Tool Video, Tubular Running Equipment, Casing Running Equipment, Casing Cementing Head, Casing Running Tool For Sale, Casing Running Oilfield, Power Tong


Contact Us:


Address: 10555 FM 1301, Boling-Iago, TX 77420, USA


Ph: +1 979-657-1216




G Maps: https://www.google.com/maps/place/DrawWorks+LP/@29.267955,-95.9501196,17z/data=!4m5!3m4!1s0x8641a75dbeb06d9b:0x36b4ecaaeb3be03e!8m2!3d29.2679503!4d-95.9479309

New-ticket Create new ticket

Create your profile

Help contribute to this project by taking a few moments to create your personal profile. Create your profile »


Shared Ticket Bins